# Apos x Community Druid R2R DAC

**URL:** <https://forum.apos.audio/t/apos-x-community-druid-r2r-dac/65>\
**Category:** Apos Product Discussions\
**Created:** [January 13, 2026, 10:18pm UTC](https://forum.apos.audio/t/apos-x-community-druid-r2r-dac/65 "2026-01-13T22:18:12Z")\
**Posts on this page:** 20\
**Page:** 1

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex010/uploads/apos/original/1X/badc0d537f73ca31efdc0e1a1e905f68d4654096.svg) [@system](https://forum.apos.audio/u/system)\
**Post date:** [January 13, 2026, 10:18pm UTC](https://forum.apos.audio/t/apos-x-community-druid-r2r-dac/65/1 "2026-01-13T22:18:13Z")

</div>

_Built around a fully-discrete R2R ladder, the Druid converts digital data into analog waveforms through a precise network of resistors rather than a high-speed modulation process. Each resistor contributes a tiny part of the signal, forming a sound that feels natural, human, and grounded in something older than silicon. This DAC does not compute. It communes._

* * *
This is a companion discussion topic for the original entry at [https://apos.audio/products/apos-x-community-druid-r2r-dac](https://apos.audio/products/apos-x-community-druid-r2r-dac)

---

<div class="post-metadata">

**Author:** ![kenkwik727](https://avatars.discourse-cdn.com/v4/letter/k/b77776/32.png) [@kenkwik727](https://forum.apos.audio/u/kenkwik727)\
**Post date:** [January 23, 2026, 4:14pm UTC](https://forum.apos.audio/t/apos-x-community-druid-r2r-dac/65/2 "2026-01-23T16:14:06Z")

</div>

Loving my Druid! great product. Great bang for the buck.

punches well above it’s price point.

---

<div class="post-metadata">

**Author:** ![system](https://canada1.discourse-cdn.com/flex010/uploads/apos/original/1X/badc0d537f73ca31efdc0e1a1e905f68d4654096.svg) [@system](https://forum.apos.audio/u/system)\
**Post date:** [January 23, 2026, 4:14pm UTC](https://forum.apos.audio/t/apos-x-community-druid-r2r-dac/65/3 "2026-01-23T16:14:06Z")

</div>

Listed on January 23, 2026, 4:14pm UTC



---

<div class="post-metadata">

**Author:** ![kunal](https://yyz2.discourse-cdn.com/flex010/user_avatar/forum.apos.audio/kunal/32/26_2.png) [@kunal](https://forum.apos.audio/u/kunal)\
**Post date:** [January 23, 2026, 6:38pm UTC](https://forum.apos.audio/t/apos-x-community-druid-r2r-dac/65/4 "2026-01-23T18:38:40Z")

</div>

Thank you! This encourages us a lot and is great to hear. If you feel comfortable, we’d love for you to share images and any op-amp rolling notes you might have. The community would enjoy that.

---

<div class="post-metadata">

**Author:** ![Alex](https://yyz2.discourse-cdn.com/flex010/user_avatar/forum.apos.audio/alex/32/55_2.png) [@Alex](https://forum.apos.audio/u/Alex)\
**Post date:** [January 23, 2026, 7:06pm UTC](https://forum.apos.audio/t/apos-x-community-druid-r2r-dac/65/5 "2026-01-23T19:06:29Z")

</div>

Aww yeah. Love to hear it!

---

<div class="post-metadata">

**Author:** ![kenkwik727](https://avatars.discourse-cdn.com/v4/letter/k/b77776/32.png) [@kenkwik727](https://forum.apos.audio/u/kenkwik727)\
**Post date:** [January 23, 2026, 10:42pm UTC](https://forum.apos.audio/t/apos-x-community-druid-r2r-dac/65/6 "2026-01-23T22:42:47Z")

</div>

Now I want the Merlin for my other Desktop system!

---

<div class="post-metadata">

**Author:** ![Salad\_Design\_Andy](https://yyz2.discourse-cdn.com/flex010/user_avatar/forum.apos.audio/salad_design_andy/32/17_2.png) [@Salad\_Design\_Andy](https://forum.apos.audio/u/Salad_Design_Andy)\
**Post date:** [January 24, 2026, 3:51pm UTC](https://forum.apos.audio/t/apos-x-community-druid-r2r-dac/65/7 "2026-01-24T15:51:36Z")

</div>

Me too! I have a Merlin and Gremlin with a Druid on the way with its own Gremlin. I’m quite curious to compare the two side by side - either comparing the DACs, or comparing different tubes in the Gremlins.

---

<div class="post-metadata">

**Author:** ![SteveM](https://avatars.discourse-cdn.com/v4/letter/s/a183cd/32.png) [@SteveM](https://forum.apos.audio/u/SteveM)\
**Post date:** [January 24, 2026, 6:42pm UTC](https://forum.apos.audio/t/apos-x-community-druid-r2r-dac/65/8 "2026-01-24T18:42:05Z")

</div>

Hello!

I just received my Apos Druid DAC this morning, and was excited to open the box, unpack it, and hook it up to see & hear this good-looking new audio device. One problem though; it appears that there’s no way to connect my Bluesound Node 2i to this DAC.

Am I missing something?

Thanks,  
Steve M

---

<div class="post-metadata">

**Author:** ![Salad\_Design\_Andy](https://yyz2.discourse-cdn.com/flex010/user_avatar/forum.apos.audio/salad_design_andy/32/17_2.png) [@Salad\_Design\_Andy](https://forum.apos.audio/u/Salad_Design_Andy)\
**Post date:** [January 24, 2026, 7:16pm UTC](https://forum.apos.audio/t/apos-x-community-druid-r2r-dac/65/9 "2026-01-24T19:16:53Z")

</div>

> [@SteveM](#):
>
> Bluesound Node 2i

After reading some [info here](https://support1.bluesound.com/hc/en-us/articles/115006191908-Using-Digital-Passthrough-with-Bluesound-Players) it seems that Bluesound players don’t do audio passthrough from the USB port (unless to other select Bluesound modules), so it seems like it may not be natively compatible.

I remember looking at some Bluesound streamers and this limitation was something that kept me away from them. There may be a workaround, my initial search was quite quick.

---

<div class="post-metadata">

**Author:** ![SteveM](https://avatars.discourse-cdn.com/v4/letter/s/a183cd/32.png) [@SteveM](https://forum.apos.audio/u/SteveM)\
**Post date:** [January 24, 2026, 7:57pm UTC](https://forum.apos.audio/t/apos-x-community-druid-r2r-dac/65/10 "2026-01-24T19:57:25Z")

</div>

A quick [Amazon.com](http://Amazon.com) search shows a male USB to coax connector is available in a variety of lengths. I’m hopeful that this might be the solution, Andy.

---

<div class="post-metadata">

**Author:** ![Alex](https://yyz2.discourse-cdn.com/flex010/user_avatar/forum.apos.audio/alex/32/55_2.png) [@Alex](https://forum.apos.audio/u/Alex)\
**Post date:** [January 25, 2026, 12:46am UTC](https://forum.apos.audio/t/apos-x-community-druid-r2r-dac/65/11 "2026-01-25T00:46:10Z")

</div>

Keep us posted. Will be good info if anyone else runs into a similar issue.

---

<div class="post-metadata">

**Author:** ![Salad\_Design\_Andy](https://yyz2.discourse-cdn.com/flex010/user_avatar/forum.apos.audio/salad_design_andy/32/17_2.png) [@Salad\_Design\_Andy](https://forum.apos.audio/u/Salad_Design_Andy)\
**Post date:** [January 25, 2026, 1:40am UTC](https://forum.apos.audio/t/apos-x-community-druid-r2r-dac/65/12 "2026-01-25T01:40:36Z")

</div>

![1000046320](https://canada1.discourse-cdn.com/flex010/uploads/apos/original/1X/ad76c84db1c2857160e7af3dc4c55c55057eacf7.jpeg) Here’s my weird little setup. The source is a weird old CS-400C industrial keyboard I’ve retrofitted with a screen and RPi4 along with an Arduino that scans the key codes and sends the Pi something it recognizes as a keyboard. Just swapped the Merlin for the Druid today and I love it. I’m actually shocked I hear any difference, but there’s certainly some, but it’s small. A bit warmer sounding, but could also just be that the highs are more rolled off or mids are more pronounced. I’ll do some real listening this week with some actual thoughts on the sound plus a better comparison. For the price though, another stellar addition. I’m excited to try swapping out the op amps as well.

---

<div class="post-metadata">

**Author:** ![Aleph5](https://avatars.discourse-cdn.com/v4/letter/a/e95f7d/32.png) [@Aleph5](https://forum.apos.audio/u/Aleph5)\
**Post date:** [January 25, 2026, 3:52pm UTC](https://forum.apos.audio/t/apos-x-community-druid-r2r-dac/65/13 "2026-01-25T15:52:09Z")

</div>

I (also) have a connectivity issue with my new Druid. The product description states it has a USB-B connector while the unit (and the product photos show it) actually has a USB-C. I didn’t think it would make any difference with the right cable, but my streamer with a USB-A connector (Eversolo A8) does not see the Druid. My MacBook Air with USB-C ports does see the Druid, but that’s not how I intend to use the DAC.

Is there a fix or workaround? Would I need something like a Topping HS02? Not that I want to buy another product, but would that work if there’s not a simpler solution?

Thanks!

---

<div class="post-metadata">

**Author:** ![Alex](https://yyz2.discourse-cdn.com/flex010/user_avatar/forum.apos.audio/alex/32/55_2.png) [@Alex](https://forum.apos.audio/u/Alex)\
**Post date:** [January 25, 2026, 11:55pm UTC](https://forum.apos.audio/t/apos-x-community-druid-r2r-dac/65/14 "2026-01-25T23:55:37Z")

</div>

Hm I think the USB type-B is a typo. Thank you for flagging that. @kunal @tom_at_apos can you confirm? (edit: yup it’s been fixed. thanks again)

I’ve not tried a streamer before, so forgive me for being basic, but I assume you’ve tried the easy stuff like setting the output on the A8, power cycling things, and trying a different cable? If you use the USB A-C cable with your streamer to your macbook does it see the streamer (if that’s even possible)?

Otherwise, hopefully Tom or someone will be more helpful when they get in tomorrow

---

<div class="post-metadata">

**Author:** ![Aleph5](https://avatars.discourse-cdn.com/v4/letter/a/e95f7d/32.png) [@Aleph5](https://forum.apos.audio/u/Aleph5)\
**Post date:** [January 26, 2026, 3:28pm UTC](https://forum.apos.audio/t/apos-x-community-druid-r2r-dac/65/15 "2026-01-26T15:28:59Z")

</div>

Pretty much tried all that, but will verify again. I also tried connecting from a Raspberry Pi USB-A (Pi Core Player) with both of the A-C cables I tried, without luck. I’ll try things again today, but would be interested to know if others have successfully connected a streamer, and if so did it have a USB A or C on its end.

---

<div class="post-metadata">

**Author:** ![kunal](https://yyz2.discourse-cdn.com/flex010/user_avatar/forum.apos.audio/kunal/32/26_2.png) [@kunal](https://forum.apos.audio/u/kunal)\
**Post date:** [January 26, 2026, 4:59pm UTC](https://forum.apos.audio/t/apos-x-community-druid-r2r-dac/65/16 "2026-01-26T16:59:02Z")

</div>

Hi @Aleph5 Can you also send us a picture of your setup so we can look at it internally? Also, is the Eversolo on USB out?

---

<div class="post-metadata">

**Author:** ![Aleph5](https://avatars.discourse-cdn.com/v4/letter/a/e95f7d/32.png) [@Aleph5](https://forum.apos.audio/u/Aleph5)\
**Post date:** [January 26, 2026, 5:47pm UTC](https://forum.apos.audio/t/apos-x-community-druid-r2r-dac/65/17 "2026-01-26T17:47:32Z")

</div>

Will do a bit later and will report back. The Eversolo USB out selection was grayed out, suggesting no connection, but I’ll verify again and with comparison to a different external DAC.

---

<div class="post-metadata">

**Author:** ![kunal](https://yyz2.discourse-cdn.com/flex010/user_avatar/forum.apos.audio/kunal/32/26_2.png) [@kunal](https://forum.apos.audio/u/kunal)\
**Post date:** [January 26, 2026, 5:48pm UTC](https://forum.apos.audio/t/apos-x-community-druid-r2r-dac/65/18 "2026-01-26T17:48:24Z")

</div>

Got it. Thank you

---

<div class="post-metadata">

**Author:** ![Aleph5](https://avatars.discourse-cdn.com/v4/letter/a/e95f7d/32.png) [@Aleph5](https://forum.apos.audio/u/Aleph5)\
**Post date:** [January 26, 2026, 7:24pm UTC](https://forum.apos.audio/t/apos-x-community-druid-r2r-dac/65/19 "2026-01-26T19:24:06Z")

</div>

Very happy to report it now works. One of my USB-A to USB-C cables does not work, and I thought I had tried a second. Another one now works, though, so I’m excited again to continue listening.

Thank you all for your time and help!

P.S. I found another known good cable, and it will not connect (stays grayed out on streamer). The cable that does work is very short and so connects to a USB-A to USB-A female extender. Puzzling. I can still post pics upon request. I might also try it on a WiiM Mini streamer I normally use elsewhere.

---

<div class="post-metadata">

**Author:** ![kunal](https://yyz2.discourse-cdn.com/flex010/user_avatar/forum.apos.audio/kunal/32/26_2.png) [@kunal](https://forum.apos.audio/u/kunal)\
**Post date:** [January 26, 2026, 7:41pm UTC](https://forum.apos.audio/t/apos-x-community-druid-r2r-dac/65/20 "2026-01-26T19:41:04Z")

</div>

Awesome!

[Next page](https://forum.apos.audio/t/apos-x-community-druid-r2r-dac/65.md?page=2)
